Project Corveep

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Before
543576_730_full.jpg


During
CIMG3348.jpg


IMAG2095.jpg


After
0512161942.jpg


0514161748.jpg



Next up is spring under, high fenders, and 40s.
0604161657.jpg


0606161716a.jpg


0522161304_HDR.jpg
 
Last edited:
Man that engine with that CJ5 wheelbase, are you extending the stock wheelbase?
 
Nothing cooler than a jeep with a V8. The sound makes up for everything else.
 
Lowered. Still need to weld the SUA perches to the axles, install shocks, buy 17" wheels for the 40s, and of course trim fenders.

0620162010.jpg
Nice CJ. My friend built this CJ7, it's on 46x19.50x20's, Dana 60 front, 14 bolt rear and a AMC V-8 under the hood with enough horses to do burnout.



 
Lowered. Still need to weld the SUA perches to the axles, install shocks, buy 17" wheels for the 40s, and of course trim fenders.

0620162010.jpg

Did you get those swampers from Premo? They look like my old ones off my YJ.
 
What size lifts springs are you running to keep it SUA?
 
These are flat 0" lift springs. The shackles are boomerangs and are pretty tall. I acquired them from a pile in Jeff's yard so I'm not sure on the height but they are definitely an inch or two taller than stock.

The front springs are factory rear CJ7 springs and the rear springs are factory rear S10 / Blazer springs.
 
2

Latest posts

Back
Top